NARROWED IRS TYPE 1 & 3 REAR TRAILING
ARMS
These arms are not cut into multiple parts and then welded back together allowing for failure points. Ours are kept as a single part, we cut out the old bearing housing, narrow, plate, and install a new bearing housing, make ours the best on the market. For more then 15 years CoolRydes has made its name on high quality parts. We want to provide the best built quality parts at reasonable prices for American built products.
All of our IRS narrowed trailing arms are made in the same fixtures that we assemble our Mendeola True Track rear trailing arms in. This allows us to set the amount of camber at what ever ride height we want. This means we can tilt the rear wheels as much or as little to nothing at all, at any ride height.
We make these in 1 inch to 1.5 inch narrowed widths.
Currently we have 1 inch and 1.25 inch narrowed in stock and ready to ship.
We also offer custom size trailing arms from -1.5 - +5 inch widths, and stock length to +5 lengths. Call for pricing and lead times.
1 INCH NARROWED IRS TRAILING ARMS
THESE ARMS ARE NARROWED 1 INCH FROM STOCK WIDTH PER SIDE. COMPLETELY ASSEMBLED IN A FIXTURE THAT ALLOWS US TO SET CAMBER AND TOE ANGLES.
1" NARROWED STOCK TYPE IRS TRAILING ARMS FOR USE ON 1969 AND LATER TYPE 1 & 3 VEHICLES
************************** $325**************$325**********$325
PLEASE ADD CORE CHARGE TO YOUR BASKET IF YOU DON'T HAVE THEM, OR DON'T WISH TO SEND THEM IN
1 1/4 INCH NARROWED IRS TRAILING ARMS
THESE ARMS ARE NARROWED 1 INCH FROM STOCK WIDTH PER SIDE. COMPLETELY ASSEMBLED IN A FIXTURE THAT ALLOWS US TO SET CAMBER AND TOE ANGLES.
1 1/4 INCHNARROWED STOCK TYPE IRS TRAILING ARMS FOR USE ON 1969 AND LATER TYPE 1 & 3 VEHICLES
************************* $325**********$325**********$325
PLEASE ADD CORE CHARGE TO YOUR BASKET IF YOU DON'T HAVE THEM, OR DON'T WISH TO SEND THEM IN.
1 1/2 INCH NARROWED IRS TRAILING ARMS
THESE ARMS ARE NARROWED 1 INCH FROM STOCK WIDTH PER SIDE. COMPLETELY ASSEMBLED IN A FIXTURE THAT ALLOWS US TO SET CAMBER AND TOE ANGLES.
1 1/2 INCHNARROWED STOCK TYPE IRS TRAILING ARMS FOR USE ON 1969 AND LATER TYPE 1 & 3 VEHICLES
************************* $325********$325***********$325
PLEASE ADD CORE CHARGE TO YOUR BASKET IF YOU DON'T HAVE THEM, OR DON'T WISH TO SEND THEM IN.
PLEASE ADD $325 CORE CHARGE TO BASKET IF YOU DON'T WISH TO SEND
YOURS IN, OR DON'T HAVE A SET.
STOCK TYPE 3/4 TO 1 INCH SHORT AXLE
COMPLETE 3/4 TO 1 INCH SHORT TYPE 1 AXLES PAIR
3/4 TO 1 INCH COMPLETE TYPE 1 AXLES WITH CV JOINTS AND BOOTS. SIMPLY BOLT THEM ON NO MORE MESS. THESE ARE STOCK TYPE MATERIAL NOT RECOMENDED FOR TURBO MOTORS.
3/4 - 1" INCH NARROW STOCK TYPE AXLES ONLY
3/4 - 1 INCH SHORTER THEN STOCK REAR AXLES STOCK TYPE MATERIAL FOR TYPE ONE OR TYPE 2 CV JOINTS
4140 CHROMOLY FOR 3/4 TO 1 INCH NARROW AXLES PAIR AXELS ONLY
4140 CHROMOLY FOR 3/4 TO 1 INCH NARROW AXLES PAIR AXELS ONLY NO CV JOINTS
AXLES 1.25 TO 1.50 INCH NARROWED REAR ARMS
4140 CHROMOLY FOR 1.25 TO 1.50 INCH NARROW AXLES PAIR AXLES ONLY
4140 CHROMOLY FOR 1.25 TO 1.50 INCH NARROW AXLES PAIR AXLES ONLY
